Eco-Friendly &Non-Electric SystemSaves energy and is kind to the environment: it runs on water pressure, not electricity, so it installs straight away with no new wiring, and there is no risk of electrical leakage.
Material100% polypropylene with an antibacterial additive: strong, durable and lightweight. It supports up to 150 kg and is shaped to fit the body, so it is comfortable to sit on without strain.
Nozzle DesignThe nozzles are designed especially for the Asian body, with separate front (feminine) and rear nozzles so each area is cleaned properly.
Self Cleaning &Ceramic ValveBuilt-in automatic nozzle cleaning before and after every use keeps it clean and safe, and a knob sets the spray strength to your liking for a gentle wash.
Soft Close FunctionSoft Close on both the lid and the seat makes them open and close gently, and protects them from damage caused by slamming.
Minimal DesignModern design in a clean, elegant, minimal white.
Specifications
Weight0.9 kg.
Size (W x L x H)46.5 x 32 x 13.5 cm.
Water pressure0.5 Bar or more
ControlsSide control panel; 2 nozzles, front and rear
Compatible Fixtures
Recommended toilet sizes for Eri Home
AUnder 44 cm
44.5-47.5 cm
Over 48 cm
BUnder 3.5 cm
Over 3.5 cm
CBetween 14-25 cm
Over 25 cm
Please check the size of your toilet so the seat works as it should and gives you a comfortable experience.
Bidet Comparison
Non-electric bidet seat ERi HomeStandard toilet seat
Material
100% PP plasticOrdinary plastic
Antibacterial coating
Load capacity
150 kg80 kg
Controls
Side control panel, 2 nozzles-
Warranty
2 years-
Water saving
400 ml / 5 sec800 ml / 5 sec
Self Cleaning
Soft Close
Uses electricity
Non-electric bidet seat ERi HomeNon-electric bidet seat Other brands
Material
100% PP plasticCeramic
Antibacterial coating
Load capacity
150 kg-
Controls
Side control panel, 2 nozzlesLever, 1 nozzle
Warranty
2 years1 year
Water saving
400 ml / 5 sec667 ml per use
Self Cleaning
Soft Close
Uses electricity
Non-electric bidet seat ERi HomeElectric bidet seat Other brands
Material
100% PP plasticPlastic
Antibacterial coating
Load capacity
150 kg150 kg
Controls
Side control panel, 2 nozzlesSide control panel, 2 nozzles
Warranty
2 years2 years
Water saving
400 ml / 5 sec250-600 ml per use
Self Cleaning
Soft Close
Uses electricity
Load-tested by NSTDA: supports up to 150 kg.
Antibacterial performance certified by Thailand’s National Metal and Materials Technology Center (MTEC).
How to Install
1
Turn off the water valve before you start, then fit the mounting plate to the toilet.
2
Slide the seat onto the mounting plate.
3
Wrap thread seal tape around the water pipe.
4
Connect the water hose, turn the valve back on and try it.
How to Clean
Clean the nozzle with a toothbrush or a sponge. Avoid anything sharp.
Clean the seat with a clean cloth. Don’t use cleaners with harsh chemicals: they can make the surface coating peel off.
The ERi bidet seat runs on your home’s mains water pressure. Just connect the supply hose to the stop valve beside the toilet: the water pressure pushes the nozzle out and releases the water.
Product Detail
Eco-Friendly & Non-Electric System
Saves energy and is kind to the environment: it runs on water pressure, not electricity, so it installs straight away with no new wiring, and there is no risk of electrical leakage.
Material
100% polypropylene with an antibacterial additive: strong, durable and lightweight. It supports up to 150 kg and is shaped to fit the body, so it is comfortable to sit on without strain.
Nozzle Design
The nozzles are designed especially for the Asian body, with separate front (feminine) and rear nozzles so each area is cleaned properly.
Self Cleaning & Ceramic Valve
Built-in automatic nozzle cleaning before and after every use keeps it clean and safe, and a knob sets the spray strength to your liking for a gentle wash.
Soft Close Function
Soft Close on both the lid and the seat makes them open and close gently, and protects them from damage caused by slamming.
Minimal Design
Modern design in a clean, elegant, minimal white.
Compatible Fixtures
Recommended toilet sizes for Eri Home
A
Under 44 cm
44.5-47.5 cm
Over 48 cm
B
Under 3.5 cm
Over 3.5 cm
C
Between 14-25 cm
Over 25 cm
Please check the size of your toilet so the seat works as it should and gives you a comfortable experience.
How to Install
1
Turn off the water valve before you start, then fit the mounting plate to the toilet.
2
Slide the seat onto the mounting plate.
3
Wrap thread seal tape around the water pipe.
4
Connect the water hose, turn the valve back on and try it.
How to Clean
Clean the nozzle with a toothbrush or a sponge. Avoid anything sharp.Clean the seat with a clean cloth. Don’t use cleaners with harsh chemicals: they can make the surface coating peel off.